Relämodul, Faller Car
385 SEK
Description
Article no.: F02.161659
Interacting with scenarios on the spot. Module composed of 2
relays (12 V DC) on small PCB that allows to trigger various actions
on the model layout by plugging some wire straps (also called
jumpers).
- Connected to the »Traffic-Control«, Art. 161651 or the »Extension
module«, Art. 161352 the module can switch on and off e.g. a
smoke generator, Art. 180690 or a modeller’s synchronous motor,
Art. 180629 (alternating current).
- Connected to an »Extension module« one of the outputs can
actuate a motor in forward motion, while the other output will
actuate the motor in reverse motion, by plugging the wire straps
accordingly.
- It is also possible for the module to link various digital systems
potential-free: one of the systems switches the relay on and that
signal will be processed in another system.
- By plugging the wire straps accordingly, two signals can be
generated out of one signal: since a normally closed contact and a
normally open contact of the relay are used, either one contact or
the other will be closed depending on whether the relay has pulled
up or is open. By suitably connecting the relay module it is also
possible to reverse a signal.
- By connecting the relay module in series, it is possible to switch
higher current values or even other voltages (e.g. an alternating
voltage) on modules
relays (12 V DC) on small PCB that allows to trigger various actions
on the model layout by plugging some wire straps (also called
jumpers).
- Connected to the »Traffic-Control«, Art. 161651 or the »Extension
module«, Art. 161352 the module can switch on and off e.g. a
smoke generator, Art. 180690 or a modeller’s synchronous motor,
Art. 180629 (alternating current).
- Connected to an »Extension module« one of the outputs can
actuate a motor in forward motion, while the other output will
actuate the motor in reverse motion, by plugging the wire straps
accordingly.
- It is also possible for the module to link various digital systems
potential-free: one of the systems switches the relay on and that
signal will be processed in another system.
- By plugging the wire straps accordingly, two signals can be
generated out of one signal: since a normally closed contact and a
normally open contact of the relay are used, either one contact or
the other will be closed depending on whether the relay has pulled
up or is open. By suitably connecting the relay module it is also
possible to reverse a signal.
- By connecting the relay module in series, it is possible to switch
higher current values or even other voltages (e.g. an alternating
voltage) on modules
- BrandFaller
- Mfg. item no161659
- Secure payment by card
- Send e-mail or chat with us if we are online
- We ship world wide
We reserve the right for typos and errors in article descriptions
Description
Article no.: F02.161659
Interacting with scenarios on the spot. Module composed of 2
relays (12 V DC) on small PCB that allows to trigger various actions
on the model layout by plugging some wire straps (also called
jumpers).
- Connected to the »Traffic-Control«, Art. 161651 or the »Extension
module«, Art. 161352 the module can switch on and off e.g. a
smoke generator, Art. 180690 or a modeller’s synchronous motor,
Art. 180629 (alternating current).
- Connected to an »Extension module« one of the outputs can
actuate a motor in forward motion, while the other output will
actuate the motor in reverse motion, by plugging the wire straps
accordingly.
- It is also possible for the module to link various digital systems
potential-free: one of the systems switches the relay on and that
signal will be processed in another system.
- By plugging the wire straps accordingly, two signals can be
generated out of one signal: since a normally closed contact and a
normally open contact of the relay are used, either one contact or
the other will be closed depending on whether the relay has pulled
up or is open. By suitably connecting the relay module it is also
possible to reverse a signal.
- By connecting the relay module in series, it is possible to switch
higher current values or even other voltages (e.g. an alternating
voltage) on modules
relays (12 V DC) on small PCB that allows to trigger various actions
on the model layout by plugging some wire straps (also called
jumpers).
- Connected to the »Traffic-Control«, Art. 161651 or the »Extension
module«, Art. 161352 the module can switch on and off e.g. a
smoke generator, Art. 180690 or a modeller’s synchronous motor,
Art. 180629 (alternating current).
- Connected to an »Extension module« one of the outputs can
actuate a motor in forward motion, while the other output will
actuate the motor in reverse motion, by plugging the wire straps
accordingly.
- It is also possible for the module to link various digital systems
potential-free: one of the systems switches the relay on and that
signal will be processed in another system.
- By plugging the wire straps accordingly, two signals can be
generated out of one signal: since a normally closed contact and a
normally open contact of the relay are used, either one contact or
the other will be closed depending on whether the relay has pulled
up or is open. By suitably connecting the relay module it is also
possible to reverse a signal.
- By connecting the relay module in series, it is possible to switch
higher current values or even other voltages (e.g. an alternating
voltage) on modules
Files and media
 | Instructions |